0

B2DEE – BBD Analog Delay VST

A BBD analog delay inspired by the BOSS DM-2 — the MN3205 bucket-brigade chip and NE570 compander modelled at the circuit level, with 1–1600 ms delay, tempo sync, Ping Pong, Mid/Side and a BBD Filter Mode. Try every feature free for 14 days.

Original price was: $18.Current price is: $9.

DOWNLOAD DEMO

Vintage BBD warmth. Modern delay control.

B2DEE is a BBD analog delay plug-in inspired by the BOSS DM-2. Its delay engine follows the DM-2 V2 signal path at the circuit level — the MN3205 bucket-brigade chip, the NE570 compander, the analog filters and their transistor stages — and every repeat travels through that whole path again.

Around that vintage core, B2DEE adds what a modern DAW needs: delay times from 1 ms to 1600 ms, tempo sync, stereo and Ping Pong processing, Mid/Side control, controllable self-oscillation, and a BBD Filter Mode that turns the circuit into a lo-fi colouring tool.

Windows VST3 · 14-day free trial with every feature

A Delay That Lives in the Circuit

In B2DEE the character of the echoes is not a filter on top of a clean digital delay. The signal passes through:

Input Buffer & Pre-Emphasis → NE570 Compressor → Input Filter → MN3205 BBD → Output Filter → NE570 Expander → De-Emphasis

Feedback returns to the compressor’s summing node, just like the original circuit, so each repeat is another trip through the BBD, the compander and the filters. The modelled MN3205 runs at its own clock — about 6.83 kHz to 102.4 kHz depending on TIME — with its 4096 stages, transfer loss and bucket noise, so the darker, grainier sound of long BBD delays comes from the delay line itself.

Four Tones: DARK, WARM, CLEAR, BRIGHT

  • DARK — the closest to the original DM-2: rounded highs and warm, subdued repeats.
  • WARM — a little more open, keeping the smooth BBD character. The default.
  • CLEAR — more high-frequency detail stays in the echoes.
  • BRIGHT — goes beyond the DM-2 circuit for brighter repeats that cut through busy, rhythmic productions, at short and long delay times alike.

Because the tone sits inside the feedback loop, its colour builds up with every repeat.

Long Trails Without Losing Control

The original pedal tips into self-oscillation quickly. B2DEE moves that point to about 85% REPEATS, so you get long, controlled trails below it — and a singing, self-oscillating loop above it when you want one.

Stereo, Ping Pong and Mid/Side

Left and right run through their own modelled circuits. Ping Pong sends the first repeat left and alternates from there. The M/S FOCUS control shapes the balance between the Mid and Side of the delayed signal — widen a drum slapback on an AUX, keep a lo-fi echo centred, or automate it so a dub trail opens up as it decays.

BBD Filter Mode

Filter Mode passes your dry signal through the modelled compressor, filters, BBD and expander without the delay, so you can use the circuit itself as a colour. Soften a bright synth, give a snare a dusty, mellow edge, or add an old-gear feel to samples. DRY MIX sets the coloured signal; turn LEVEL down for the pure filter sound.

Controls

  • LEVEL — delay level.
  • REPEATS — feedback; self-oscillation from about 85%.
  • TIME — 1 to 1600 ms, or tempo-synced with SYNC and DIVISION (two bars to 1/64, dotted and triplet).
  • DRY MIX — level of the direct signal.
  • M/S FOCUS — Mid/Side balance of the delayed signal.
  • INPUT — ±10 dB drive into the circuit, compensated at the output.
  • TONE — DARK / WARM / CLEAR / BRIGHT.
  • FILTER MODE, PINGPONG, SYNC, HQ — mode switches.
  • Presets — 18 factory presets (drum slapbacks, synced rhythmic delays, BBD Filter settings) plus your own.

HQ and NORMAL

  • HQ — the default: the full circuit model, including the detailed transistor behaviour, the NE570 compressor network and the coupling capacitors.
  • NORMAL — a lighter engine for lower CPU, with its own slightly different character.

Made for the Mix

  • Zero latency — no plug-in delay compensation needed.
  • Accurate tail reporting — the tail length follows TIME and REPEATS, so offline renders do not cut your echoes.

Try It for 14 Days

Install B2DEE and it starts a 14-day trial with every feature on the first launch — no key and no sign-up needed (an internet connection is needed once to start the trial). When the trial ends, enter your license key to keep going.

System Requirements

  • Windows: Windows 10 or 11, 64-bit
  • Format: VST3
  • Channels: mono and stereo
  • Sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz
  • Compatible VST3 host required
  • Internet connection required to start the trial and for license activation
  • License can be activated on up to two machines

BOSS and DM-2 are trademarks of their respective owners. B2DEE is an independent Rust Romance product and is not affiliated with or endorsed by BOSS or Roland.

Date Update

v1.0.0 — Initial release. BBD delay engine following the BOSS DM-2 V2 signal path (MN3205 BBD, NE570 compander, analog filters), 1–1600 ms delay with tempo sync, Stereo / Ping Pong / Mid/Side, four tones (DARK / WARM / CLEAR / BRIGHT), Filter Mode, HQ and NORMAL quality modes, 18 factory presets. Windows VST3 and macOS VST3 / AU.

B2DEE is a BBD analog delay plug-in inspired by the BOSS DM-2. Its delay engine follows the DM-2 V2 signal path at the circuit level: the MN3205 bucket-brigade chip with its own clock, the NE570 compressor and expander, the analog filters and their transistor stages. Feedback returns into the compressor, so every repeat goes through the whole circuit again.

No. B2DEE is inspired by the DM-2 and models the important parts of its analog signal path, but it also goes further: delay times from 1 to 1600 ms, tempo sync, stereo and Ping Pong, Mid/Side control, self-oscillation moved to about 85% REPEATS, the BRIGHT tone and Filter Mode are not on the original pedal.

Filter Mode sends the dry signal through the modelled compressor, filters, BBD and expander without the delay, so the circuit becomes a colouring tool. Use it to soften synths, give drums a dusty edge or add an old-gear feel to samples. DRY MIX sets the coloured signal; turn LEVEL down for the pure filter sound.

On the first launch B2DEE starts a 14-day trial with every feature — no key and no sign-up needed. An internet connection is needed once to start it. When the trial ends, the plug-in asks for a license key and passes the audio through unchanged until you enter one. One trial per computer.

HQ is the default and runs the full circuit model, including the detailed transistor behaviour, the NE570 compressor network and the coupling capacitors. NORMAL runs a lighter engine for lower CPU. They are not meant to sound identical: treat NORMAL as its own character, not a preview mode.

Windows 10 or 11, 64-bit, in any VST3 host. Supported sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz. A license can be activated on up to two machines.